+46(0)35-179940

Stainless spring steel strip EN 10151 - Materials and Tensile Strengths


 

Cold worked conditions:

Cond. Tensile Strength, Rm [MPa]
+C700 700 - 850
+C850 850 - 1000
+C1000 1000 - 1150
+C1150 1150 - 1300
+C1300 1300 - 1500
+C1500 1500 - 1700
+C1700 1700 - 1900
+C1900 1900 - 2200
Intermediate tensile strengths may be agreed. Alternatively, the steels may be specified in terms of minimum 0,2% proof strength or hardness, but only one parameter can be specified in one order.

Materials and Tensile strengths - EN 10151

Stainless steel  No. +C700 +C850 +C1000 +C1150 +C1300 +C1500 +C1700 +C1900
Ferritic steel
X6Cr17 1.4016 X X - - - - - -
Martensitic steels
X20Cr13a 1.4021a x x - - - - - -
X30Cr13a 1.4028a x x - - - - - -
X39Cr13a 1.4031a x x - - - - - -
Precipitation hardening steel
X7CrNiAl17-7b 1.4568b - - x x x x x -
Austenitic steels
X10CrNi18-8 1.4310 - x x x x x x x
X5CrNi18-10 1.4301 x x x x x - - -
X5CrNiMo17-12-2 1.4401 x x x x x - - -
X11CrNiMnN19-8-6 1.4369 - x x x x xc - -
X12CrMnNiN17-7-5 1.4372 - x x x x x - -
a Also available in the annealed condition, with tensile strength ranges, Rm, as follows: X20Cr13: 500-700 MPa; X30Cr13: 540 - 740 MPa; X39Cr13: 560 - 760 MPa and in the quenched and tempered condition (see tables in EN 10151).
b Also available in the solution annealed condition with the tensile strength range (Rm) 800 - 1000 MPa.
c Strip with tensile strength up to +C1500 can be supplied depending on requested thickness.

Subject to typing errors and/or changes in standards.